Service Center
Common problem
Your Position : Home > Service Center
Title: Voltage Oscillation - alternator
Author: tongli motor  Time: 2012/7/28
Adjust AVR steady-state potentiometer), If the adjustment fails, try normal/fast mode (ST2)
Check the rev: possibility of nonperiodical oscillation
Loose connection
AVR failure
Engine rev is too low at loads or LAN configuration too high

Before a News: The voltage is correct at no load while too low at load - alternator
Next a News: Voltage too high - alternator
Copyright © 2012 Fujian Tongli Electrical Machinery Co., Ltd. All Rights Reserved.    Powered by:Fuan.cn    闽ICP备12016154号-1